Once-through steam boiler
KDKE Series
Feature
- Dry steam is generated 4~5 minutes after ignition without the loss of preheating load, reducing fuel cost.
- A high performing boiler that achieves high efficiency with exclusive heat transfer fins.
- Easy to handle as operation, water supply and burner combustion control can be automatically controlled and set with one-touch operation.
- Equipped with a high-performance steam separator to supply high-quality dry steam even with sudden load fluctuations.
- Strong resistance to corrosion caused by scale deposition by equipping patented square shaped lower pipe joint header
- Attaching a low-NOx burner ensures fuel cost saving, and NOx of 40 ppm or less is guaranteed for operation under 4% of O₂. (Option)
- The artificial intelligence D-Brain control enables easier operation and management. (Option)
- Cascade unit control system can minimize installation space and enhance response to load fluctuation.
Standard specifications for once-through steam boiler KDKE series
Category |
Unit |
KDKE-100 |
KDKE-200 |
KDKE-300 |
KDKE-400 |
KDKE-500 |
KDKE-600 |
KDKE-800 |
KDKE-1000 |
KDKE-1500 |
KDKE-2000 |
KDKE-2500 |
KDKE-3000 |
Boiler specifications |
Rated evaporation |
kg/h |
100 |
200 |
300 |
400 |
500 |
600 |
800 |
1,000 |
1,500 |
2,000 |
2,500 |
3,000 |
Heat output |
MW |
0.07 |
0.15 |
0.22 |
0.30 |
0.37 |
0.45 |
0.60 |
0.75 |
1.12 |
1.50 |
1.87 |
2.25 |
kcal/h |
64,370 |
128,740 |
193,110 |
257,480 |
321,850 |
386,220 |
514,960 |
643,700 |
965,550 |
1,287,400 |
1,609,250 |
1,931,100 |
Efficiency |
% |
91% |
Heating area |
㎡ |
3.1 |
4.2 |
4.9 |
4.9 |
4.9 |
4.9 |
9.54 |
9.60 |
9.74 |
20 |
22 |
23 |
Control method |
- |
ON - OFF |
HI - LOW - OFF |
Power |
V |
220V x 1ø x 60Hz / 220V x 3ø x 60Hz |
220V x 3ø x 60Hz / 380V x 3ø x 60Hz |
Fuel consumption |
LNG |
N㎥/h |
7.1 |
14.1 |
21.2 |
28.3 |
35.4 |
42.4 |
56.6 |
70.7 |
106.1 |
141.5 |
176.8 |
212.2 |
Propane |
N㎥/h |
3.2 |
6.3 |
9.5 |
12.6 |
15.8 |
18.9 |
25.3 |
31.6 |
47.4 |
63.2 |
78.9 |
94.7 |
Butane |
N㎥/h |
2.4 |
4.8 |
7.2 |
9.6 |
12.0 |
14.4 |
19.2 |
24.0 |
36.0 |
48.0 |
59.9 |
71.9 |
Diesel |
kg/h |
6.9 |
13.7 |
20.6 |
27.5 |
34.3 |
41.2 |
54.9 |
68.7 |
103.0 |
137.4 |
171.7 |
206.0 |
Power consumption |
Total electric capacity |
kW |
0.45 |
0.75 |
1.22 |
2.15 |
2.15 |
2.34 |
6.0 |
6.0 |
9.8 |
14.8 |
14.8 |
18.8 |
Blower motor |
0.15 |
0.25 |
0.37 |
0.55 |
0.55 |
0.74 |
3.7 |
3.7 |
7.5 |
11.0 |
11.0 |
15.0 |
Water pump |
0.2 |
0.4 |
0.75 |
1.5 |
1.5 |
1.5 |
2.2 |
2.2 |
2.2 |
3.7 |
3.7 |
3.7 |
Connection diameter |
Steam outlet |
A |
25 |
25 |
32 |
40 |
40 |
40 |
50 |
50 |
65 |
80 |
80 |
80 |
Water inlet |
20 |
20 |
20 |
20 |
20 |
20 |
25 |
25 |
25 |
40 |
40 |
40 |
Drainage outlet |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
Oil inlet |
15 |
15 |
15 |
20 |
20 |
20 |
25 |
25 |
25 |
32 |
32 |
32 |
Gas inlet |
25 |
25 |
25 |
40 |
40 |
40 |
40 |
40 |
50 |
50 |
50 |
50 |
Flue |
ø mm |
150 |
200 |
200 |
250 |
250 |
300 |
300 |
300 |
350 |
400 |
500 |
500 |
External size |
Width(W) |
mm |
990 |
800 |
1,120 |
1,130 |
1,000 |
1,260 |
1,440 |
1,500 |
1,650 |
2,450 |
2,460 |
2,510 |
Length(L) |
1,500 |
1,300 |
1,630 |
1,310 |
1,570 |
1,790 |
1,690 |
1,750 |
2,250 |
2,650 |
2,650 |
2,630 |
Height(H) |
1,860 |
1,920 |
2,080 |
2,160 |
2,160 |
2,420 |
2,390 |
2,350 |
2,620 |
3,130 |
3,230 |
3,290 |
Weight |
kg |
490 |
520 |
710 |
850 |
880 |
1,400 |
1,500 |
1,620 |
1,670 |
4,100 |
4,300 |
4,900 |
- The rated evaporation amount is based on the water supply temperature of 20℃ and steam pressure of 1MPa. (KDKE-100~200 is 0.7MPa.)
-
Fuel consumption is based on the low-level calorific value.
Low-level calorific value ① LNG : 10,000 kcal/N㎥ ② Propane : 22,400 kcal/N㎥ ③ Butane : 10,000 kcal/N㎥ ④ Diesel : 10,000 kcal/N㎥ (Low-level calorific value, specific gravity 0.836)
- These specifications are subject to change without prior notice to improve product performance.
- This specification is based on a gas boiler. For detailed specifications, refer to the specification table.
Condensing high efficiency once-through steam boiler
KDKE-HE Series
Feature
- Equipped with a high-performance water supply pre-heater (STS-304/316), it absorbs the high-temperature exhaust gas’s heat generated after combustion as much as possible, and increases the water inlet temperature to achieve more than 99% efficiency.
- As the conductivity of boiler water is maintained within the allowable value by automatically measuring the concentration of boiler water, there is no carry-over and the lifespan is extended.
- Compact body design reduces the volume of retained water and allows steam to be generated quickly within 3~5 minutes after burner ignition.
- Easy to handle as operation, water supply and burner combustion control can be automatically controlled and set with one-touch operation
- Equipped with a high-performance steam separator to supply high-quality dry steam even with sudden load fluctuations.
- Attaching a low-NOx burner ensures fuel cost saving, and NOx of 40 ppm or less is guaranteed for operation under 4% of O₂. (Option)
- The artificial intelligence D-Brain control enables easier operation and management. (Option)
Integrated boiler control system
- Cascade unit control system can minimize installation space and enhance response to load fluctuation.
Standard specifications for condensing high efficiency once-through type of steam boiler KDKE-HE series
Category |
Unit |
KDKE-400HE |
KDKE-500HE |
KDKE-800HE |
KDKE-1000HE |
KDKE-1500HE |
KDKE-2000HE |
KDKE-2500HE |
KDKE-3000HE |
KDKE-4000HE |
Boiler specifications |
Rated evaporation |
kg/h |
400 |
500 |
800 |
1,000 |
1,500 |
2,000 |
2,500 |
3,000 |
4,000 |
Heat output |
MW |
0.30 |
0.37 |
0.60 |
0.75 |
1.12 |
1.50 |
1.87 |
2.25 |
2.99 |
kcal/h |
257.480 |
321,850 |
514,960 |
643,700 |
965,550 |
1,287,400 |
1,609,250 |
1,931,100 |
2,574,800 |
Efficiency |
% |
99% |
Heating area |
㎡ |
4.9 |
4.99 |
9.5 |
9.7 |
9.99 |
20.00 |
22 |
23 |
29 |
Control method |
- |
HI - LOW - OFF |
Power |
V |
220V x 3ø x 60Hz / 380V x 3ø x 60Hz |
Fuel consumption |
LNG |
N㎥/h |
26.01 |
32.51 |
52.02 |
65.02 |
97.53 |
130.04 |
162.55 |
195.06 |
260.08 |
Propane |
N㎥/h |
11.61 |
14.51 |
23.22 |
29.03 |
43.54 |
58.05 |
72.57 |
87.08 |
116.11 |
Butane |
N㎥/h |
8.88 |
11.02 |
17.63 |
22.04 |
33.06 |
44.08 |
55.10 |
66.12 |
88.16 |
Diesel |
kg/h |
- |
- |
- |
- |
- |
- |
- |
- |
- |
Power consumption |
Total electric capacity |
kW |
2.35 |
2.35 |
6.0 |
6.0 |
9.8 |
14.8 |
14.8 |
18.8 |
22.3 |
Blower motor |
0.75 |
0.75 |
3.70 |
3.70 |
7.5 |
11.0 |
11.0 |
15.0 |
18.5 |
Water pump |
1.5 |
1.5 |
2.2 |
2.2 |
2.2 |
3.4 |
3.4 |
3.7 |
3.7 |
Connection diameter |
Steam outlet |
A |
40 |
40 |
50 |
50 |
65 |
80 |
80 |
80 |
100 |
Water inlet |
25 |
25 |
25 |
25 |
25 |
40 |
40 |
40 |
50 |
Drainage outlet |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
Gas inlet |
40 |
40 |
40 |
40 |
50 |
50 |
50 |
50 |
50 |
Flue |
ø mm |
250 |
250 |
300 |
300 |
350 |
400 |
500 |
500 |
500 |
External size |
Width(W) |
mm |
1,000 |
1,000 |
1,550 |
1,600 |
1,650 |
2,450 |
2,460 |
2,510 |
2,560 |
Length(L) |
1,900 |
1,900 |
2,100 |
2,150 |
2,550 |
3,050 |
3,050 |
2,750 |
2,750 |
Height(H) |
2,160 |
2,160 |
2,450 |
2,650 |
2,700 |
3,130 |
3,230 |
3,290 |
3,730 |
Weight |
kg |
1,100 |
1,240 |
1,710 |
2,000 |
2,300 |
4,400 |
5,200 |
6,300 |
7,200 |
- The qualified evaporation amount is based on the water supply temperature of 20℃ and steam pressure of 1MPa.
-
Fuel consumption is based on the low-level calorific value.
Low-level calorific value ① LNG : 10,000 kcal/N㎥ ② Propane : 22,400 kcal/N㎥ ③ Butane : 10,000 kcal/N㎥ ④ Diesel : 10,000 kcal/N㎥ (Low-level calorific value, specific gravity 0.836)
- These specifications are subject to change without prior notice to improve product performance.
- This specification is based on a gas boiler. For detailed specifications, refer to the specification table.